Top 10 common forklift accidents ， forklift operation ought to take note of these matters ！.

Do not take too lightly the forklift at the workplace. If the operation is not good, there will certainly be significant accidents in minutes, and there are numerous mishaps including forklifts.

Case 1: The forklift freight blocked the chauffeur's view, and the person ahead might not be discovered, leading to a rolling crash.
Instance 2: In order to preserve the balance of the forklift when lifting heavy goods, the employees utilized their body weight as the weight, which nearly created casualties.
Situation 3: The width of the forklift freight exceeds the allowed size of the course and hangs on the roadside rack, which virtually causes an mishap.
Case 4: Forklift is speeding and surrender throughout a turn.
Instance 5: The forklift vehicle driver did not observe the pedestrian, and the pedestrian did not see the forklift.
Case 6: The forklift lifts the personnel unlawfully, the forklift driver does not put on the seat belt, the forklift lifter falls and the driver is crushed when the forklift rolls over.
Situation 7: The forklift vehicle driver did not wear a seat belt and dropped from the automobile when it rolled over and was crushed.
Forklift procedure need to take note of these matters ：.

Start.
1. Prior to beginning, observe the surroundings, and after verifying that there are no barriers that hinder the safety of driving, honk the horn initially and then begin.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress ( atmospheric pressure) gauge must be risk-free prior to beginning.
3. When the forklift starts with a lots, the vehicle driver should initially confirm that the lots is secure and reputable.
4. The begin has to be slow and constant.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the mast needs to be slanted backwards. .
2. Do not lift the fork too expensive when driving. When entering and leaving the task website or while driving, beware that there will be no challenges overhead. When the load is taking a trip, the fork has to not be raised expensive, which will impact the security of the forklift. .
3. After dumping, the fork needs to be decreased to the regular driving setting before driving. .
4. When turning, if there are pedestrians or cars close by, the driving signal must be released first. High-speed doglegs are prohibited. High-speed doglegs will trigger the automobile to shed side security and tip over. .
5. When the forklift is downhill, it is strictly restricted to turn off the flame and slide, and it is forbidden to brake instantly while driving with loads unless there are special situations.
6. When the forklift is running, it should obey the traffic rules in the factory and have to keep a particular safety range from the vehicle in front. .
7. When the forklift is running, the tons must remain in the most affordable position that does not prevent the driving, and the gantry ought to be appropriately slanted back. The tons will not be increased other than when piling or packing. .
8. The elevation of the tons must not obstruct the driver's view. In special situations, when the thing affects the forward vision, drive at a low speed when reversing.
9. It is forbidden to activate the ramp, neither to drive across the ramp. .
10. The secure driving speed of the forklift in the factory location is 5 km/h, and it needs to drive securely at a low speed when getting in the manufacturing workshop location. .
11. When the forklift is raised, lifted or driven, it is forbidden for workers to base on the fork to hold products and play a stabilizing role. .
12. If problems are found, they will be repaired and reported in a timely fashion, and they will certainly never ever run with illnesses or hide them.

filling and discharging.
1. When fork-loading items, the range in between both forks ought to be adjusted as needed to make the load of the two forks well balanced and not skewed, and one side of the item need to protest the shelf. .
2. It is prohibited to work with a solitary fork or use a fork top or draw. In special situations, safety and security indication must be established to advise surrounding pedestrians. .
3. In the process of filling and discharging items, the forklift has to be braked with the brake. .
4. The speed of the lorry must be slow and constant. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled items and harm individuals. .
5. When utilizing a fork to fork the goods, the fork should be as deep as feasible under the load, and it ought to be noted that the fork idea must not touch other items or objects. The tons should be supported with marginal back tilt of the gantry to ensure that the lots does not slide in reverse. The pole can be slanted ahead slightly when the tons is decreased to enable easy positioning of the load and extraction of the forks. .
6. It is restricted to fork items at high speed and collide with difficult items with the fork head. .
7. When the forklift Electric Forklift Truck for Warehouse is working, it is prohibited for individuals to stand around the fork, so as to prevent the collapse of the goods and harm people. .
8. Overwhelming is banned, and it is restricted to utilize forks to lift workers to engage in high-altitude operations to prevent high-altitude dropping crashes. .
9. It is Stand-on Electric Pallet Stacker not allowed to use the brake inertia to slide, place, round or roll objects. .
10. It is not allowed to utilize forks to pick, turn pallet discharge.

Leaving .
1. It is forbidden to leave the forklift when the products on the fork are in the air. Before leaving the forklift, you should unload the goods or lower the fork frame.
2. Pull the emergency brake deal with to dead or depress the hand brake switch.
3. The engine is shut off and the power is cut off. (Except for special situations, such as the driver does not leave the vehicle's view and does not go beyond 1 min).
4. Remove the key. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance ought to be examined, and fuel, lubricating oil and cooling water need to be included.
2. Check the safety and security performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are full and effective.
4. Throughout the operation of the forklift, examine whether the stress and temperature are typical.
5. After the forklift is running, the external leakage ought to also be checked and the seals need to be replaced in time.

Forklift Safety Operation Specifications.
1. You need to examine before leaving the cars and truck;.
2. When you come across a person before you during driving, you must send a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the nadir of the cargo must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming ought to not be as well sharp to stop the tendency of "free switching";.
6. Running up and down the slope should be slow-moving and uniform, and no activating the slope is enabled.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the car should be driven in reverse when worsening;.
8. When the forklift workers bring the goods and progress, if they encounter big or hefty goods and most likely to the vehicle driver's view, they should take the reversing exercise
.
The "Eight Prohibitions" must be complied with in the procedure.
1. Single fork procedure is not allowed.
2. It is not allowed to lift the goods for far away driving.
3. It is not permitted to get the goods by handing over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not enabled to make use of inertia pressure to pick up the goods.
6. It is not enabled to utilize stopping force to exile round or easy-to-roll things.
7. It is not permitted to bring individuals to work on the pallet or fork, and it is purely prohibited to stand under the fork after the fork is raised.
8. Do not drive laterally on inclines
.
Car parking is not allowed under the following conditions.
1. Contours, narrow roads, railway crossings;.
2. Areas with a longitudinal slope greater than 5%.
3. When there is an barrier on one side of the road, the opposite side of the area with the exact same size as the obstacle should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844